HEN Technologi WPF 100 WFH-WPF-100H Ask for price
Dealer number
OLF3040124
Pris
Pris på ansøgning
Make
HEN Technologi
Model
WPF 100 WFH-WPF-100H
Byggeår
2022
Yderligere information
Type: Ny maskine
Make: HEN Technologi
Model: WPF 100 WFH-WPF-100H
Byggeår: 2022
Arbejdsbredde (meter): 1
Oplysninger
Hen path maintenance device
Care and maintenance equipment for
attachment to tractors
or other carrier vehicles from 80PS
for wheel tracks, footpaths, cemetery paths,
parks, verges, gravel, forest,
gravel paths with a water-bound
wearing course
up to a grain size of 0-60 mm.
Depending on the degree of
up to 15 cm deep, depending on the degree of damage
milled, remixed and a water drainage profile
water drainage profile is produced.
The grading curve of the existing material
is not changed.
The working width of the machine is
100 cm. A vibratory plate placed directly behind
behind the levelling bar consolidates
the new gravel roadbed
Technical equipment:
Three-point linkage Cat: I or II
Central large dimensioned gearbox
with lateral output to the rotor.
Hydraulic drive variant of the
vibratory plate via the vehicle hydraulics
Requirements for the vehicle hydraulics:
Delivery rate: min 35l/min
Delivery pressure: min 100 bar
Pressureless return flow
required.
Milling drum mounted on both sides with
with point-attack tools, milling and mixing chamber
lined with 400 Hardox panels.
Lateral milling interior cladding with
Hardox plates.
Vibratory plate mounted on silent blocks
with screwable wear plate made of
Hardox
Adjustable levelling bar
Overload protection in the main drive
shaft
length: 2.000 mm
width: 1.400 mm
height: 1.600 mm
net weight: 1.050 kg
gross weight: 1.200 kg
NGW-OSK-9-38z6-38z6
cardan shaft without fuse BG9 up to
244.7 dyn. Nm
Machine side 1 3/8" Z6
Tractor side 1 3/8" Z6
I= 860mm
net weight: 35 kg
gross weight: 40 kg
NHO-1-1-550
Hydraulic top link for WPF 100
Cat 1/1
Overlong
WFH-WPF-202
Lighting device LED with magnet
fixed to the frame with brackets
WFH-WPF-220
Freight charge for delivery
WFH-WPF-222
Instruction by trained personnel
Daily flat rate incl. travel expenses
Automatic translation from German without guarantee.
Show original description
Care and maintenance equipment for
attachment to tractors
or other carrier vehicles from 80PS
for wheel tracks, footpaths, cemetery paths,
parks, verges, gravel, forest,
gravel paths with a water-bound
wearing course
up to a grain size of 0-60 mm.
Depending on the degree of
up to 15 cm deep, depending on the degree of damage
milled, remixed and a water drainage profile
water drainage profile is produced.
The grading curve of the existing material
is not changed.
The working width of the machine is
100 cm. A vibratory plate placed directly behind
behind the levelling bar consolidates
the new gravel roadbed
Technical equipment:
Three-point linkage Cat: I or II
Central large dimensioned gearbox
with lateral output to the rotor.
Hydraulic drive variant of the
vibratory plate via the vehicle hydraulics
Requirements for the vehicle hydraulics:
Delivery rate: min 35l/min
Delivery pressure: min 100 bar
Pressureless return flow
required.
Milling drum mounted on both sides with
with point-attack tools, milling and mixing chamber
lined with 400 Hardox panels.
Lateral milling interior cladding with
Hardox plates.
Vibratory plate mounted on silent blocks
with screwable wear plate made of
Hardox
Adjustable levelling bar
Overload protection in the main drive
shaft
length: 2.000 mm
width: 1.400 mm
height: 1.600 mm
net weight: 1.050 kg
gross weight: 1.200 kg
NGW-OSK-9-38z6-38z6
cardan shaft without fuse BG9 up to
244.7 dyn. Nm
Machine side 1 3/8" Z6
Tractor side 1 3/8" Z6
I= 860mm
net weight: 35 kg
gross weight: 40 kg
NHO-1-1-550
Hydraulic top link for WPF 100
Cat 1/1
Overlong
WFH-WPF-202
Lighting device LED with magnet
fixed to the frame with brackets
WFH-WPF-220
Freight charge for delivery
WFH-WPF-222
Instruction by trained personnel
Daily flat rate incl. travel expenses
Automatic translation from German without guarantee.
Show original description
Hen Wegepflegegerät
Pflege- und Instandhaltungsgerät zum
Anbau an Traktoren
oder anderen Trägerfahrzeugen ab 80PS
für Radwege, Wanderwege, Friedhofswege,
Parkanlagen, Bankette, Kies, Wald,
Schotterwege mit einer wassergebundenen
Verschleißschicht
bis zu einer Körnungsgröße von 0-60 mm.
Die Verschleißdecke wird je nach
Beschädigungsgrad bis zu 15 cm Tief
aufgefräst, neu gemischt und ein
Wasserablaufprofil hergestellt.
Die Sieblinie des vorhandenen Material
wird nicht verändert.
Die Arbeitsbreite der Maschine beträgt
100 cm. eine Rüttelplatte direkt hinter
der Planierschiene angeordnet verfestigt
den neuen Schotter-Fahrbanbelag
Technische Ausstattung:
Dreipunktanbaubock Kat: I oder II
Mittiges großdimensionierstes Getriebe
mit Seitenabtrieb aud den Rotor.
Hydraulische Antriebsvariante der
Rüttelplatte über die Fahrzeughydraulik
Anforderungen an die Fahrzeughydraulik:
Förderleistung: min 35l/min
Förderdruck: min 100 bar
Druckloser Rücklauf zwingend
erforderlich.
Beidseitig gelagerte Fräswalze mit
Rundschaftmeißeln, Fräs- und Mischraum
mit 400 Hardoxplatten verkleidet.
Seitliche Fräsinnenverkleidung mit
Hardoxplatten.
Auf Silentblöcken gelagerte Rüttelplatte
mit schraubbarer Verschleißplatte aus
Hardox
Planierschiene verstellbar
Überlastsicherung in der Hauptantriebs-
Welle
Länge: 2.000 mm
Breite: 1.400 mm
Höhe: 1.600 mm
netto Gewicht: 1.050 kg
brutto Gewicht: 1.200 kg
NGW-OSK-9-38z6-38z6
Gelenkwelle ohne Sicherung BG9 bis
244,7 dyn. Nm
Maschinenseitig 1 3/8" Z6
Schlepperseitig 1 3/8" Z6
I= 860mm
netto Gewicht: 35 kg
brutto Gewicht: 40 kg
NHO-1-1-550
Hydraulischer Oberlenker für WPF 100
Kat 1/1
Überlang
WFH-WPF-202
Beleuchtungseinrichtung LED mit Magnet
mit Halterungen am Rahmen befestigt
WFH-WPF-220
Frachtkostenanteil für Lieferung
WFH-WPF-222
Einweisung durch geschultes Fachpersonal
Tagespauschale inkl. Reisekosten
Pflege- und Instandhaltungsgerät zum
Anbau an Traktoren
oder anderen Trägerfahrzeugen ab 80PS
für Radwege, Wanderwege, Friedhofswege,
Parkanlagen, Bankette, Kies, Wald,
Schotterwege mit einer wassergebundenen
Verschleißschicht
bis zu einer Körnungsgröße von 0-60 mm.
Die Verschleißdecke wird je nach
Beschädigungsgrad bis zu 15 cm Tief
aufgefräst, neu gemischt und ein
Wasserablaufprofil hergestellt.
Die Sieblinie des vorhandenen Material
wird nicht verändert.
Die Arbeitsbreite der Maschine beträgt
100 cm. eine Rüttelplatte direkt hinter
der Planierschiene angeordnet verfestigt
den neuen Schotter-Fahrbanbelag
Technische Ausstattung:
Dreipunktanbaubock Kat: I oder II
Mittiges großdimensionierstes Getriebe
mit Seitenabtrieb aud den Rotor.
Hydraulische Antriebsvariante der
Rüttelplatte über die Fahrzeughydraulik
Anforderungen an die Fahrzeughydraulik:
Förderleistung: min 35l/min
Förderdruck: min 100 bar
Druckloser Rücklauf zwingend
erforderlich.
Beidseitig gelagerte Fräswalze mit
Rundschaftmeißeln, Fräs- und Mischraum
mit 400 Hardoxplatten verkleidet.
Seitliche Fräsinnenverkleidung mit
Hardoxplatten.
Auf Silentblöcken gelagerte Rüttelplatte
mit schraubbarer Verschleißplatte aus
Hardox
Planierschiene verstellbar
Überlastsicherung in der Hauptantriebs-
Welle
Länge: 2.000 mm
Breite: 1.400 mm
Höhe: 1.600 mm
netto Gewicht: 1.050 kg
brutto Gewicht: 1.200 kg
NGW-OSK-9-38z6-38z6
Gelenkwelle ohne Sicherung BG9 bis
244,7 dyn. Nm
Maschinenseitig 1 3/8" Z6
Schlepperseitig 1 3/8" Z6
I= 860mm
netto Gewicht: 35 kg
brutto Gewicht: 40 kg
NHO-1-1-550
Hydraulischer Oberlenker für WPF 100
Kat 1/1
Überlang
WFH-WPF-202
Beleuchtungseinrichtung LED mit Magnet
mit Halterungen am Rahmen befestigt
WFH-WPF-220
Frachtkostenanteil für Lieferung
WFH-WPF-222
Einweisung durch geschultes Fachpersonal
Tagespauschale inkl. Reisekosten
Kontaktinformation
TecVis GmbH
Weseler Str. 603
48163 Münster
Tyskland
www.atc-trader.com
Weseler Str. 603
48163 Münster
Tyskland
www.atc-trader.com
+49 (0) 251 74970-73
+49 (0) 251 74970-40
Kontaktperson
+49 (0) 251 74970-73
+49 (0) 251 74970-40
Lignende tilbud
Kverneland Ng-S 601 F35 Zpw
Byggeår 2022, 6 m,Antal: 10310492
CLAAS Nordostbayern GmbH & Co. KG, DE - 92342 Freystadt
Kverneland Ng-S 601 F35 Zpw
Byggeår 2022, 6 m,Antal: 10310486
CLAAS Nordostbayern GmbH & Co. KG, DE - 96142 Hollfeld
Maschio Aquila Rapido Plus 6000 Z500
Byggeår 2023,Antal: 491001402000084
Fricke Landmaschinen GmbH, DE - 27404 Gyhum-Bockel
Maschio Dm 3000/Kp
Byggeår 2022, 3 m,Antal: 10312004
BayWa Niederbayern, DE - 94315 Straubing
Maschio C 280
Byggeår 2022,Antal: 491001802000046
Fricke Landmaschinen GmbH, DE - 27404 Gyhum-Bockel