Meyer-Lohne REKORDIA FARMER PTW 16.000 L
Yderligere information
Type: Brugt maskine
Make: Meyer-Lohne
Model: REKORDIA FARMER PTW 16.000 L
Byggeår: 2020
Timer: 5
Hastighed km/t: 40
Vægt (t): 13936
Tilladt totalvægt (t): 23
Oplysninger
Meyer-Lohne pump tank truck, tandem
TANK:
- Hot-dip galvanized steel tank according to DIN
EN1461 for pH 6 to 10,
- Wall thickness 6mm, diameter 1,850 mm,
cylindrical length 6.000mm,additional
with Zinklar preservative,
- Tank volume 16,200 ltrs,
- 3 baffles
- Wheel arches as tank cut-outs at the front
and behind
- Manhole cover 600 mm in the rear of the
Boiler end
- large sight glass front top and bottom
left in the front boiler wall
- Fill level indicator at the front left in the
front boiler wall
- dome cover 600 mm at the front top of the
Bolted boiler
- Hose storage hooks on both sides
- UNI mounting bracket galvanized rear bottom
for subsequent mounting of rigid
Drag shoe and
Drag Hose Distributors
DRIVER:
- height adjustable landing gear painted
- Self-tracking steered double axle unit
with square axle 150 mm and brake
410 x 180mm with hydraulic
reverse drive lock and
Unit steering axle rear, axle distance
1,900 mm, track width 2,150 mm
- Parabolic suspension, axles above the
Springs mounted
- load dependent double line controlled
Air brake system (ALB) with
Brake cylinder
- Low pressure tyres 750/60R-30,5 with
Profile front loader693M RADIAL BKT up to 60 km/h
- Wheel chocks and warning signs
- Mudguard galvanized with mud flap
- Underride guard with truck Triple-chamber
Lighting
- TÜV test with type approval certificate
up to 40 km/h
with weight limitation to max. 22
Tonnes Total weight according to EN707
- Suction pipe NW 150, 5 m long (4 m
Spiral suction and pressure hose with
V- part and 1 m galvanized pipe)
SPECIAL EQUIPMENT:
- Digital vacuum manometer from -1
up to 0 bar with diaphragm for
Suction line,
including assembly in the factory
- Holes for axle unit for a
subsequent retrofitting of a
Tyre pressure control system
- Recording console Compressor for
subsequent retrofitting of a
Tyre pressure control system
- Rigid hitch drawbar galvanised made of
Edging profiles for 14.600 to 20.000
Litre with towing ball eye K80
- with preparation for forced steering
up to 24 tons total weight
- Support load increase to 3 to 4 tons
- pulling mouth height 650 mm
instead of top hitch up to 2 tonnes
- mechanical-hydraulic forced steering
for tandem vehicles for forward and
Reverse
- with a steering cylinder on the
Hitch drawbar
- with ball eye K50, hand pump included
Oil reservoir and pressure gauge,
- according to ISO 26402 in driving direction left
Only in connection with edged
Hitch drawbar or hydraulic
spring hitch drawbar
- Pre-equipping with K50 control ball in
Direction of travel left according to ISO standard
26402 must be available on tractor side
its
Pneumatic gear change for
MEYLO eccentric pump type MEF 1S152
or 1S172 designed for:
MEYTRONIC or electro-hydraulic
Remote control panel
MEYLO progressive cavity pump type 1S152
ZWG up to 7,000 litres/min,
consisting of:
- with shift reduction gear of the
Speed during suction and
Output for power take-off shaft speed 540
up to 1,000 rpm,
- with hydraulic spade slider
NW 200 for suction from the tank,
- hydraulic intake wedge gate valve
NW 150 including hydraulic
Manual control valve,
- Pressure line NW 150 and three-way outlet
directional control valve NW 150 and reinforced
Wide-angle cardan shaft with
Overload shear pin
Double-acting MEYLO-CUT 10.600 with
Hydraulic motor, consisting of:
- Cutting head for 200 mm round flange
- Quick coupler and single acting
hydraulic wedge gate valve 150 mm
- large stone catch box below with
Cleaning flap
- Service flap at the front and
Switching valve for left/right rotation
via manual override
- including operating instructions
- MOUNTED ON THE RIGHT SIDE IN DRIVING DIRECTION
Prefitting automatic
Fill level switch-off via
Fill level indicator from suction to
Flushing via sensor
- only in connection with comfort or
MEYTRONIC control system
Preparation MAXI suction arm 200 mm for
all REKORDIA vehicles in
Front direction of travel RIGHT
- for elevated tank or pit extraction
suitable
- blind flanged
- with holder for hydraulic cylinder
- Reinforcement on the container for later
Retrofit
- in the case of the pump tanker vehicle with double-acting cutting
this is generally indicated on the
Mounting side of the suction arm with
standard intake manifold
attached
Additional suction 200/150 mm front
left
FOR SNOW double-acting RIGHT FOREIGHT through the
Tank via MEYLO-CUT for
Pump tank trucks with MEYLO-
Eccentric pump type 1S152 and 1S172,
consisting of:
- single-acting hydraulic
wedge gate valve 150 mm and
Quick coupler
- Including electrical manual override
- only in connection with electrical
hydraulic control block possible
2 work lights LED 2000 Lumen
- 12 to 24V for boom lighting,
including assembly in the factory
Drag shoe distributor BlackBird with
Working width 15 m galvanised for
RIGID ATTACHMENT
- 60 drag shoes of hardened steel,
- Hose distance 25cm with spring loaded
row spacers,
- Preloaded leaf springs for more
Stability in the linkage,
- transport width 2.95 m, transport height
3,40 m,
- Middle part and two side arms
hydraulically foldable in and out
via two double-acting cylinders,
- two ExaCut ECQ exact distributors each 30
Outlets DN 40 hydraulic
Driven with double-acting cutting action,
- Flow-optimized slurry outlet for
a high-precision deposition of the liquid manure in
a narrow strip,
- Passive pendulum compensation in
middle frame and in both
side arms, with one top link, with
hydraulic lines,
- DropStop by folding up the
linkage,
- including two support wheels
height adjustable with stand,
Crash protection,
- Lighting and warning signs,
- including side pockets,
- all HD cylinders with end bearing damping,
- for rigid mounting included
Mounting frame for Uni attachment bracket rigid
- without electro-hydraulic control
- including assembly in the factory
Hydraulic part width section control of the
Side arms left and right for
Towing shoe Vogelsang BLACK BIRD
- by means of two hydraulic
double acting spade valve DN 150
Tramline control via manual
Ball valve NW 40
- per hose for drag hose
Part width section or tramline control
via manual ball valve NW 40
- per hose for drag hose
Working width from 15 m to 12 m only
Drain hoses
Control block basic package FABRIKAT BUCHER
for comfort or MEYTRONIC
Control system, consisting of:
- for load-sensing control (LS) or
switchable to constant control
- with input plate and selection
- single acting HD connection for
Flow and hydraulic
Flow filter and pressure-free
Return and LS control line
- with holder and cover hood
- designed for oil flow rate 200
Ltr./min. at 180 bar
including assembly in the factory
Electro-hydraulic COMFORT operation
with electric remote control box,
consisting of:
- with 7m cable by plug connection
separable
- with switching distributor, expandable to
max. 14 functions
- only in connection with control block
Basic package from Bucher
Pneumatic control for
Gear change 1:2/4
- with 1x single-acting via
COMFORT control,
including assembly in the factory (1 function)
Hydraulic control for
Cutting double acting
- with 1x double-acting via
COMFORT control,
including assembly in the factory (1 function)
Hydraulic control for suction arm
front
- with 1x single acting,
- 1 x double-acting and 1x electrical
Ventilation via COMFORT control
including assembly in the factory (3
functions)
Hydraulic control for
Intake valve
- 1x double-acting via COMFORT-
Operation
- with second electrical operation on
Intake
including assembly in the factory (1 function)
Electrical control for
Limit switch float
- with 1x electrical via
COMFORT control,
including assembly in the factory (1 function)
Hydraulic control for exhaust
pusher pump tanker
- with 1 x double-acting via COMFORT
Control system
incl. assembly in the factory (1 function)
Hydraulic control for
Drag shoe distributor
- with 3 x double-acting via
COMFORT control,
including assembly in the factory(3functions)
Hydraulic control for
Unlocking of the side arms with
- 1x single-acting via COMFORT-
Control system
including assembly in the factory (1 function)
Hydraulic control for
Part width section control left and right
- for drag hose with 2x
double-acting via COMFORT control,
including assembly in the factory (1 function)
Electrical control for a
Worklights
- with 1x electrical via
COMFORT control,
including assembly in the factory (1 function)
Automatic translation from German without guarantee.
Show original description
TANK:
- Hot-dip galvanized steel tank according to DIN
EN1461 for pH 6 to 10,
- Wall thickness 6mm, diameter 1,850 mm,
cylindrical length 6.000mm,additional
with Zinklar preservative,
- Tank volume 16,200 ltrs,
- 3 baffles
- Wheel arches as tank cut-outs at the front
and behind
- Manhole cover 600 mm in the rear of the
Boiler end
- large sight glass front top and bottom
left in the front boiler wall
- Fill level indicator at the front left in the
front boiler wall
- dome cover 600 mm at the front top of the
Bolted boiler
- Hose storage hooks on both sides
- UNI mounting bracket galvanized rear bottom
for subsequent mounting of rigid
Drag shoe and
Drag Hose Distributors
DRIVER:
- height adjustable landing gear painted
- Self-tracking steered double axle unit
with square axle 150 mm and brake
410 x 180mm with hydraulic
reverse drive lock and
Unit steering axle rear, axle distance
1,900 mm, track width 2,150 mm
- Parabolic suspension, axles above the
Springs mounted
- load dependent double line controlled
Air brake system (ALB) with
Brake cylinder
- Low pressure tyres 750/60R-30,5 with
Profile front loader693M RADIAL BKT up to 60 km/h
- Wheel chocks and warning signs
- Mudguard galvanized with mud flap
- Underride guard with truck Triple-chamber
Lighting
- TÜV test with type approval certificate
up to 40 km/h
with weight limitation to max. 22
Tonnes Total weight according to EN707
- Suction pipe NW 150, 5 m long (4 m
Spiral suction and pressure hose with
V- part and 1 m galvanized pipe)
SPECIAL EQUIPMENT:
- Digital vacuum manometer from -1
up to 0 bar with diaphragm for
Suction line,
including assembly in the factory
- Holes for axle unit for a
subsequent retrofitting of a
Tyre pressure control system
- Recording console Compressor for
subsequent retrofitting of a
Tyre pressure control system
- Rigid hitch drawbar galvanised made of
Edging profiles for 14.600 to 20.000
Litre with towing ball eye K80
- with preparation for forced steering
up to 24 tons total weight
- Support load increase to 3 to 4 tons
- pulling mouth height 650 mm
instead of top hitch up to 2 tonnes
- mechanical-hydraulic forced steering
for tandem vehicles for forward and
Reverse
- with a steering cylinder on the
Hitch drawbar
- with ball eye K50, hand pump included
Oil reservoir and pressure gauge,
- according to ISO 26402 in driving direction left
Only in connection with edged
Hitch drawbar or hydraulic
spring hitch drawbar
- Pre-equipping with K50 control ball in
Direction of travel left according to ISO standard
26402 must be available on tractor side
its
Pneumatic gear change for
MEYLO eccentric pump type MEF 1S152
or 1S172 designed for:
MEYTRONIC or electro-hydraulic
Remote control panel
MEYLO progressive cavity pump type 1S152
ZWG up to 7,000 litres/min,
consisting of:
- with shift reduction gear of the
Speed during suction and
Output for power take-off shaft speed 540
up to 1,000 rpm,
- with hydraulic spade slider
NW 200 for suction from the tank,
- hydraulic intake wedge gate valve
NW 150 including hydraulic
Manual control valve,
- Pressure line NW 150 and three-way outlet
directional control valve NW 150 and reinforced
Wide-angle cardan shaft with
Overload shear pin
Double-acting MEYLO-CUT 10.600 with
Hydraulic motor, consisting of:
- Cutting head for 200 mm round flange
- Quick coupler and single acting
hydraulic wedge gate valve 150 mm
- large stone catch box below with
Cleaning flap
- Service flap at the front and
Switching valve for left/right rotation
via manual override
- including operating instructions
- MOUNTED ON THE RIGHT SIDE IN DRIVING DIRECTION
Prefitting automatic
Fill level switch-off via
Fill level indicator from suction to
Flushing via sensor
- only in connection with comfort or
MEYTRONIC control system
Preparation MAXI suction arm 200 mm for
all REKORDIA vehicles in
Front direction of travel RIGHT
- for elevated tank or pit extraction
suitable
- blind flanged
- with holder for hydraulic cylinder
- Reinforcement on the container for later
Retrofit
- in the case of the pump tanker vehicle with double-acting cutting
this is generally indicated on the
Mounting side of the suction arm with
standard intake manifold
attached
Additional suction 200/150 mm front
left
FOR SNOW double-acting RIGHT FOREIGHT through the
Tank via MEYLO-CUT for
Pump tank trucks with MEYLO-
Eccentric pump type 1S152 and 1S172,
consisting of:
- single-acting hydraulic
wedge gate valve 150 mm and
Quick coupler
- Including electrical manual override
- only in connection with electrical
hydraulic control block possible
2 work lights LED 2000 Lumen
- 12 to 24V for boom lighting,
including assembly in the factory
Drag shoe distributor BlackBird with
Working width 15 m galvanised for
RIGID ATTACHMENT
- 60 drag shoes of hardened steel,
- Hose distance 25cm with spring loaded
row spacers,
- Preloaded leaf springs for more
Stability in the linkage,
- transport width 2.95 m, transport height
3,40 m,
- Middle part and two side arms
hydraulically foldable in and out
via two double-acting cylinders,
- two ExaCut ECQ exact distributors each 30
Outlets DN 40 hydraulic
Driven with double-acting cutting action,
- Flow-optimized slurry outlet for
a high-precision deposition of the liquid manure in
a narrow strip,
- Passive pendulum compensation in
middle frame and in both
side arms, with one top link, with
hydraulic lines,
- DropStop by folding up the
linkage,
- including two support wheels
height adjustable with stand,
Crash protection,
- Lighting and warning signs,
- including side pockets,
- all HD cylinders with end bearing damping,
- for rigid mounting included
Mounting frame for Uni attachment bracket rigid
- without electro-hydraulic control
- including assembly in the factory
Hydraulic part width section control of the
Side arms left and right for
Towing shoe Vogelsang BLACK BIRD
- by means of two hydraulic
double acting spade valve DN 150
Tramline control via manual
Ball valve NW 40
- per hose for drag hose
Part width section or tramline control
via manual ball valve NW 40
- per hose for drag hose
Working width from 15 m to 12 m only
Drain hoses
Control block basic package FABRIKAT BUCHER
for comfort or MEYTRONIC
Control system, consisting of:
- for load-sensing control (LS) or
switchable to constant control
- with input plate and selection
- single acting HD connection for
Flow and hydraulic
Flow filter and pressure-free
Return and LS control line
- with holder and cover hood
- designed for oil flow rate 200
Ltr./min. at 180 bar
including assembly in the factory
Electro-hydraulic COMFORT operation
with electric remote control box,
consisting of:
- with 7m cable by plug connection
separable
- with switching distributor, expandable to
max. 14 functions
- only in connection with control block
Basic package from Bucher
Pneumatic control for
Gear change 1:2/4
- with 1x single-acting via
COMFORT control,
including assembly in the factory (1 function)
Hydraulic control for
Cutting double acting
- with 1x double-acting via
COMFORT control,
including assembly in the factory (1 function)
Hydraulic control for suction arm
front
- with 1x single acting,
- 1 x double-acting and 1x electrical
Ventilation via COMFORT control
including assembly in the factory (3
functions)
Hydraulic control for
Intake valve
- 1x double-acting via COMFORT-
Operation
- with second electrical operation on
Intake
including assembly in the factory (1 function)
Electrical control for
Limit switch float
- with 1x electrical via
COMFORT control,
including assembly in the factory (1 function)
Hydraulic control for exhaust
pusher pump tanker
- with 1 x double-acting via COMFORT
Control system
incl. assembly in the factory (1 function)
Hydraulic control for
Drag shoe distributor
- with 3 x double-acting via
COMFORT control,
including assembly in the factory(3functions)
Hydraulic control for
Unlocking of the side arms with
- 1x single-acting via COMFORT-
Control system
including assembly in the factory (1 function)
Hydraulic control for
Part width section control left and right
- for drag hose with 2x
double-acting via COMFORT control,
including assembly in the factory (1 function)
Electrical control for a
Worklights
- with 1x electrical via
COMFORT control,
including assembly in the factory (1 function)
Automatic translation from German without guarantee.
Show original description
Meyer-Lohne Pumptankfahrzeug, Tandem
BEHÄLTER:
- Feuerverzinkter Stahlbehälter nach DIN
EN1461 für pH 6 bis 10,
- Wandstärke 6mm, Durchmesser 1.850 mm,
zylindrische Länge 6.000mm,zusätzlich
mit Zinklar-Konservierung,
- Behältervolumen 16.200 ltr.,
- 3 Schwallwände
- Radkästen als Tankausschnitte vorne
und hinten
- Mannlochdeckel 600 mm hinten im
Kesselboden
- großes Schauglas vorne oben und unten
links in der vorderen Kesselwand
- Füllmengenanzeiger vorne links in der
vorderen Kesselwand
- Domdeckel 600 mm vorne oben auf dem
Kessel verschraubt
- Schlauchablagehaken beidseitig
- UNI-Anbaukonsole verzinkt hinten unten
für nachträglichen Anbau von starren
Schleppschuh- und
Schleppschlauchverteilern
FAHRWERK:
- höhenverstellbare Stützwinde lackiert
- Nachlaufgelenktes Doppel-Achsaggregat
mit Achsvierkant 150 mm und Bremse
410 x 180mm mit hydraulischer
Rückfahrsperre sowie
Einheitslenkachse hinten, Achsabstand
1.900 mm, Spurbreite 2.150 mm
- Parabelfederung, Achsen oberhalb der
Federn montiert
- lastabhängiggeregelte Doppelleitungs-
Druckluftbremsanlage (ALB) mit
Bremszylinder
- Niederdruckbereifung 750/60R-30,5 mit
Profil FL693M RADIAL BKT bis 60 km/h
- Unterlegkeile und Warntafeln
- Kotflügel verzinkt mit Schmutzfänger
- Unterfahrschutz mit LKW Drei-Kammer-
Beleuchtung
- TÜV-Prüfung m. Betriebserlaubnisschein
bis 40 km/h
mit Gewichtsbegrenzung auf max. 22
Tonnen Gesamtgewicht nach EN707
- Ansaugleitung NW 150, 5 m lang (4 m
Spiralsaug-und Druckschlauch mit
V- Teil und 1 m verzinktes Rohr)
SONDERAUSSTATTUNG:
- Unterdruckmanometer digital von -1
bis 0 bar mit Membrane für
Ansaugleitung,
inklusive Montage im Werk
- Bohrungen für Achsaggregat für eine
spätere Nachrüstung einer
Reifendruckregelanlage
- Aufnahmekonsole Kompressor für
spätere Nachrüstung einer
Reifendruckregelanlage
- starre Hitch-Deichsel verzinkt aus
Kantprofilen für 14.600 bis 20.000
Liter mit Zugkugelöse K80
- mit Vorbereitung für Zwangslenkung
bis 24 Tonnen Gesamtgewicht
- Stützlasterhöhung auf 3 bis 4 Tonnen
- Zugmaulhöhe 650 mm
anstatt Obenanhängung bis 2 Tonnen
- mechanisch-hydraulische Zwangslenkung
für Tandem-Fahrzeuge für Vorwärts- und
Rückwärtsfahrt
- mit einem Lenkzylinder an der
Hitch-Deichsel
- mit Kugelöse K50, Handpumpe inklusive
Ölvorratsbehälter und Druckmanometer,
- nach ISO 26402 in Fahrtrichtung links
Nur in Verbindung mit gekanteter
Hitch-Deichsel oder hydraulisch
gefederter Hitch-Deichsel
- Vorrüstung mit K50-Anlenkkugel in
Fahrtrichtung links nach ISO-Norm
26402 muss Schlepperseitig vorhanden
sein
Pneumatische Getriebeumschaltung für
MEYLO-Exzenterpumpe Typ MEF 1S152
oder 1S172 ausgelegt für:
MEYTRONIC oder elektro-hydraulisches
Fernbedienungspult
MEYLO-Exzenterschneckenpumpe Typ 1S152
ZWG bis 7.000 Liter/min.,
bestehend aus:
- mit Schaltreduziergetriebe der
Drehzahl beim Ansaugen und
Ausbringen für Zapfwellendrehzahl 540
bis 1.000 U/min.,
- mit hydraulischen Spatenschieber
NW 200 zum Absaugen aus dem Tank,
- hydraulischem Ansaug-Keilflachschieber
NW 150 inklusive hydraulischem
Handsteuerventil,
- Druckleitung NW 150 und Auslass-Drei-
Wege-Ventil NW 150 sowie verstärkter
Weit-Winkel-Gelenkwelle mit
Überlastscherstift
Schneidwerk MEYLO-CUT 10.600 mit
Hydraulikmotor, bestehend aus:
- Schneidkopf für 200 mm Rundflansch
- Schnellkuppler und einfachwirkend
hydraulischen Keilflachschieber 150 mm
- großer Steinfangkasten unten mit
Reinigungsklappe
- Serviceklappe vorne sowie
Umschaltventil für Links-/Rechtslauf
über Handbetätigung
- inklusive Betriebsanleitung
- IN FAHRTRICHTUNG RECHTS MONTIERT
Vorrüstung automatische
Füllstandsabschaltung über
Füllmengenanzeiger von Saugen auf
Umspülung mittels Sensor
- nur in Verbindung mit Komfort- oder
MEYTRONIC-Steuerung
Vorbereitung MAXI-Saugarm 200 mm für
alle REKORDIA-Fahrzeuge in
Fahrtrichtung vorne RECHTS
- zur Hochbehälter- oder Grubenabsaugung
geeignet
- blindgeflanscht
- mit Aufnahme für Hydraulikzylinder
- Verstärkung am Behälter zur späteren
Nachrüstung
- beim Pumptankfahrzeug mit Schneidwerk
wird dieses generell auf der
Montageseite des Saugarmes mit
serienmäßigen Ansaugstutzen
angebracht
Zusätzlicher Ansaug 200/150 mm vorne
links
FÜR SCHNEIDWERK VORNE RECHTS durch den
Tank über MEYLO-CUT für
Pumptankfahrzeuge mit MEYLO-
Exzenterpumpe Typ 1S152 und 1S172,
bestehend aus:
- einfachwirkend hydraulischem
Keilflachschieber 150 mm und
Schnellkuppler
- inklusiver elektrischer Handbetätigung
- nur in Verbindung mit elektro-
hydraulischem Steuerblock möglich
2 Arbeitsscheinwerfer LED 2000 Lumen
- 12 bis 24V für Gestängebeleuchtung,
inklusive Montage im Werk
Schleppschuhverteiler BlackBird mit
Arbeitsbreite 15 m verzinkt für
STARREN ANBAU
- 60 Schleppschuhe aus gehärtetem Stahl,
- Schlauchabstand 25cm mit gefederten
Reihenabstandshalter,
- Vorgespannte Blattfedern für mehr
Stabilität im Gestänge,
- Transportbreite 2,95 m, Transporthöhe
3,40 m,
- Mittelteil und zwei Seitenarme
hydraulisch ein- und ausklappbar
über zwei doppeltwirkende Zylinder,
- zwei ExaCut ECQ-Exaktverteiler je 30
Abgängen DN 40 hydraulisch
angetrieben mit Schneidwirkung,
- Strömungsoptemierter Gülleauslass für
eine hochpräzise Ablage der Gülle in
einem schmalen Streifen,
- Passiver Pendelausgleich im
Mittelrahmen sowie in beiden
Seitenarmen, mit einem Oberlenker, mit
Hydraulikleitungen,
- DropStop durch Hochklappen des
Gestänges,
- inklusive zwei Stützräder
höhenverstellbar mit Abstellfuß,
Anfahrschutz,
- Beleuchtung und Warntafeln,
- inklusive seitliche Fangtaschen,
- alle HD-Zylinder mit Endlagerdämpfung,
- für starren Anbau inklusive
Anbaurahmen für Uni-Anbaukonsol starr
- ohne elektro-hydraulische Steuerung
- inklusive Montage im Werk
Hydraulische Teilbreitenschaltung der
Seitenarme links und rechts für
Schleppschuh Vogelsang BLACK BIRD
- mittels zwei hydraulisch-
doppelwirkenden Spatenschiebern DN 150
Fahrgassenschaltung über manuellen
Kugelhahn NW 40
- pro Schlauch für Schleppschlauch
Teilbreiten- oder Fahrgassenschaltung
über manuellen Kugelhahn NW 40
- pro Schlauch für Schleppschlauch
Arbeitsbreite von 15 m auf 12 m nur
Ablaufschläuche
Steuerblock Grundpaket FABRIKAT BUCHER
für Komfort- oder MEYTRONIC-
Steuerung, bestehend aus:
- für Load-Sensing-Steuerung (LS) oder
umschaltbar auf konstante Steuerung
- mit Eingangsplatte und Selektion
- einfachwirkenden HD-Anschluß für
Vorlauf und hydraulischen
Vorlauffilter und druckfreien
Rücklauf und LS-Steuerleitung
- mit Halter und Abdeckhaube
- ausgelegt für Ölfördermenge 200
Ltr./min. bei 180 bar
inklusive Montage im Werk
Elektro-hydraulische KOMFORT-Bedienung
mit elektrischer Fernbedienungsbox,
bestehend aus:
- mit 7m Kabel durch Steckerverbindung
trennbar
- mit Schaltverteiler, ausbaubar bis
max. 14 Funktionen
- nur in Verbindung mit Steuerblock
Grundpaket von Bucher
Pneumatische Steuerung für
Getriebeumschaltung 1:2/4
- mit 1x einfachwirkend über
KOMFORT-Steuerung,
inklusive Montage im Werk (1 Funktion)
Hydraulische Steuerung für
Schneidwerk
- mit 1x doppelwirkend über
KOMFORT-Steuerung,
inklusive Montage im Werk (1 Funktion)
Hydraulische Steuerung für Saugarm
vorne
- mit 1x einfachwirkend,
- 1 x doppelwirkend und 1x elektrische
Belüftung über KOMFORT-Steuerung
inklusive Montage im Werk (3
Funktionen)
Hydraulische Steuerung für
Ansaugventil
- 1x doppelwirkend über KOMFORT-
Bedienung
- mit zweiter elektrischer Bedienung am
Ansaug
inklusive Montage im Werk (1 Funktion)
Elektrische Steuerung für
Endabschaltung Schwimmer
- mit 1x elektrisch über
KOMFORT-Steuerung,
inklusive Montage im Werk (1 Funktion)
Hydraulische Steuerung für Auslaß-
schieber Pumptankfahrzeug
- mit 1 x doppelwirkend über KOMFORT-
Steuerung
inkl. Montage im Werk (1 Funktion)
Hydraulische Steuerung für
Schleppschuhverteiler
- mit 3 x doppelwirkend über
KOMFORT-Steuerung,
inklusive Montage im Werk(3Funktionen)
Hydraulische Steuerung für
Entriegelung der Seitenarme mit
- 1x einfachwirkend über KOMFORT-
Steuerung
inklusive Montage im Werk (1 Funktion)
Hydraulische Steuerung für
Teilbreitenschaltung links und rechts
- für Schleppschlauch mit 2x
doppelwirkend über KOMFORT-Steuerung,
inklusive Montage im Werk (1 Funktion)
Elektrische Steuerung für einen
Arbeitsscheinwerfer
- mit 1x elektrisch über
KOMFORT-Steuerung,
inklusive Montage im Werk (1 Funktion)
BEHÄLTER:
- Feuerverzinkter Stahlbehälter nach DIN
EN1461 für pH 6 bis 10,
- Wandstärke 6mm, Durchmesser 1.850 mm,
zylindrische Länge 6.000mm,zusätzlich
mit Zinklar-Konservierung,
- Behältervolumen 16.200 ltr.,
- 3 Schwallwände
- Radkästen als Tankausschnitte vorne
und hinten
- Mannlochdeckel 600 mm hinten im
Kesselboden
- großes Schauglas vorne oben und unten
links in der vorderen Kesselwand
- Füllmengenanzeiger vorne links in der
vorderen Kesselwand
- Domdeckel 600 mm vorne oben auf dem
Kessel verschraubt
- Schlauchablagehaken beidseitig
- UNI-Anbaukonsole verzinkt hinten unten
für nachträglichen Anbau von starren
Schleppschuh- und
Schleppschlauchverteilern
FAHRWERK:
- höhenverstellbare Stützwinde lackiert
- Nachlaufgelenktes Doppel-Achsaggregat
mit Achsvierkant 150 mm und Bremse
410 x 180mm mit hydraulischer
Rückfahrsperre sowie
Einheitslenkachse hinten, Achsabstand
1.900 mm, Spurbreite 2.150 mm
- Parabelfederung, Achsen oberhalb der
Federn montiert
- lastabhängiggeregelte Doppelleitungs-
Druckluftbremsanlage (ALB) mit
Bremszylinder
- Niederdruckbereifung 750/60R-30,5 mit
Profil FL693M RADIAL BKT bis 60 km/h
- Unterlegkeile und Warntafeln
- Kotflügel verzinkt mit Schmutzfänger
- Unterfahrschutz mit LKW Drei-Kammer-
Beleuchtung
- TÜV-Prüfung m. Betriebserlaubnisschein
bis 40 km/h
mit Gewichtsbegrenzung auf max. 22
Tonnen Gesamtgewicht nach EN707
- Ansaugleitung NW 150, 5 m lang (4 m
Spiralsaug-und Druckschlauch mit
V- Teil und 1 m verzinktes Rohr)
SONDERAUSSTATTUNG:
- Unterdruckmanometer digital von -1
bis 0 bar mit Membrane für
Ansaugleitung,
inklusive Montage im Werk
- Bohrungen für Achsaggregat für eine
spätere Nachrüstung einer
Reifendruckregelanlage
- Aufnahmekonsole Kompressor für
spätere Nachrüstung einer
Reifendruckregelanlage
- starre Hitch-Deichsel verzinkt aus
Kantprofilen für 14.600 bis 20.000
Liter mit Zugkugelöse K80
- mit Vorbereitung für Zwangslenkung
bis 24 Tonnen Gesamtgewicht
- Stützlasterhöhung auf 3 bis 4 Tonnen
- Zugmaulhöhe 650 mm
anstatt Obenanhängung bis 2 Tonnen
- mechanisch-hydraulische Zwangslenkung
für Tandem-Fahrzeuge für Vorwärts- und
Rückwärtsfahrt
- mit einem Lenkzylinder an der
Hitch-Deichsel
- mit Kugelöse K50, Handpumpe inklusive
Ölvorratsbehälter und Druckmanometer,
- nach ISO 26402 in Fahrtrichtung links
Nur in Verbindung mit gekanteter
Hitch-Deichsel oder hydraulisch
gefederter Hitch-Deichsel
- Vorrüstung mit K50-Anlenkkugel in
Fahrtrichtung links nach ISO-Norm
26402 muss Schlepperseitig vorhanden
sein
Pneumatische Getriebeumschaltung für
MEYLO-Exzenterpumpe Typ MEF 1S152
oder 1S172 ausgelegt für:
MEYTRONIC oder elektro-hydraulisches
Fernbedienungspult
MEYLO-Exzenterschneckenpumpe Typ 1S152
ZWG bis 7.000 Liter/min.,
bestehend aus:
- mit Schaltreduziergetriebe der
Drehzahl beim Ansaugen und
Ausbringen für Zapfwellendrehzahl 540
bis 1.000 U/min.,
- mit hydraulischen Spatenschieber
NW 200 zum Absaugen aus dem Tank,
- hydraulischem Ansaug-Keilflachschieber
NW 150 inklusive hydraulischem
Handsteuerventil,
- Druckleitung NW 150 und Auslass-Drei-
Wege-Ventil NW 150 sowie verstärkter
Weit-Winkel-Gelenkwelle mit
Überlastscherstift
Schneidwerk MEYLO-CUT 10.600 mit
Hydraulikmotor, bestehend aus:
- Schneidkopf für 200 mm Rundflansch
- Schnellkuppler und einfachwirkend
hydraulischen Keilflachschieber 150 mm
- großer Steinfangkasten unten mit
Reinigungsklappe
- Serviceklappe vorne sowie
Umschaltventil für Links-/Rechtslauf
über Handbetätigung
- inklusive Betriebsanleitung
- IN FAHRTRICHTUNG RECHTS MONTIERT
Vorrüstung automatische
Füllstandsabschaltung über
Füllmengenanzeiger von Saugen auf
Umspülung mittels Sensor
- nur in Verbindung mit Komfort- oder
MEYTRONIC-Steuerung
Vorbereitung MAXI-Saugarm 200 mm für
alle REKORDIA-Fahrzeuge in
Fahrtrichtung vorne RECHTS
- zur Hochbehälter- oder Grubenabsaugung
geeignet
- blindgeflanscht
- mit Aufnahme für Hydraulikzylinder
- Verstärkung am Behälter zur späteren
Nachrüstung
- beim Pumptankfahrzeug mit Schneidwerk
wird dieses generell auf der
Montageseite des Saugarmes mit
serienmäßigen Ansaugstutzen
angebracht
Zusätzlicher Ansaug 200/150 mm vorne
links
FÜR SCHNEIDWERK VORNE RECHTS durch den
Tank über MEYLO-CUT für
Pumptankfahrzeuge mit MEYLO-
Exzenterpumpe Typ 1S152 und 1S172,
bestehend aus:
- einfachwirkend hydraulischem
Keilflachschieber 150 mm und
Schnellkuppler
- inklusiver elektrischer Handbetätigung
- nur in Verbindung mit elektro-
hydraulischem Steuerblock möglich
2 Arbeitsscheinwerfer LED 2000 Lumen
- 12 bis 24V für Gestängebeleuchtung,
inklusive Montage im Werk
Schleppschuhverteiler BlackBird mit
Arbeitsbreite 15 m verzinkt für
STARREN ANBAU
- 60 Schleppschuhe aus gehärtetem Stahl,
- Schlauchabstand 25cm mit gefederten
Reihenabstandshalter,
- Vorgespannte Blattfedern für mehr
Stabilität im Gestänge,
- Transportbreite 2,95 m, Transporthöhe
3,40 m,
- Mittelteil und zwei Seitenarme
hydraulisch ein- und ausklappbar
über zwei doppeltwirkende Zylinder,
- zwei ExaCut ECQ-Exaktverteiler je 30
Abgängen DN 40 hydraulisch
angetrieben mit Schneidwirkung,
- Strömungsoptemierter Gülleauslass für
eine hochpräzise Ablage der Gülle in
einem schmalen Streifen,
- Passiver Pendelausgleich im
Mittelrahmen sowie in beiden
Seitenarmen, mit einem Oberlenker, mit
Hydraulikleitungen,
- DropStop durch Hochklappen des
Gestänges,
- inklusive zwei Stützräder
höhenverstellbar mit Abstellfuß,
Anfahrschutz,
- Beleuchtung und Warntafeln,
- inklusive seitliche Fangtaschen,
- alle HD-Zylinder mit Endlagerdämpfung,
- für starren Anbau inklusive
Anbaurahmen für Uni-Anbaukonsol starr
- ohne elektro-hydraulische Steuerung
- inklusive Montage im Werk
Hydraulische Teilbreitenschaltung der
Seitenarme links und rechts für
Schleppschuh Vogelsang BLACK BIRD
- mittels zwei hydraulisch-
doppelwirkenden Spatenschiebern DN 150
Fahrgassenschaltung über manuellen
Kugelhahn NW 40
- pro Schlauch für Schleppschlauch
Teilbreiten- oder Fahrgassenschaltung
über manuellen Kugelhahn NW 40
- pro Schlauch für Schleppschlauch
Arbeitsbreite von 15 m auf 12 m nur
Ablaufschläuche
Steuerblock Grundpaket FABRIKAT BUCHER
für Komfort- oder MEYTRONIC-
Steuerung, bestehend aus:
- für Load-Sensing-Steuerung (LS) oder
umschaltbar auf konstante Steuerung
- mit Eingangsplatte und Selektion
- einfachwirkenden HD-Anschluß für
Vorlauf und hydraulischen
Vorlauffilter und druckfreien
Rücklauf und LS-Steuerleitung
- mit Halter und Abdeckhaube
- ausgelegt für Ölfördermenge 200
Ltr./min. bei 180 bar
inklusive Montage im Werk
Elektro-hydraulische KOMFORT-Bedienung
mit elektrischer Fernbedienungsbox,
bestehend aus:
- mit 7m Kabel durch Steckerverbindung
trennbar
- mit Schaltverteiler, ausbaubar bis
max. 14 Funktionen
- nur in Verbindung mit Steuerblock
Grundpaket von Bucher
Pneumatische Steuerung für
Getriebeumschaltung 1:2/4
- mit 1x einfachwirkend über
KOMFORT-Steuerung,
inklusive Montage im Werk (1 Funktion)
Hydraulische Steuerung für
Schneidwerk
- mit 1x doppelwirkend über
KOMFORT-Steuerung,
inklusive Montage im Werk (1 Funktion)
Hydraulische Steuerung für Saugarm
vorne
- mit 1x einfachwirkend,
- 1 x doppelwirkend und 1x elektrische
Belüftung über KOMFORT-Steuerung
inklusive Montage im Werk (3
Funktionen)
Hydraulische Steuerung für
Ansaugventil
- 1x doppelwirkend über KOMFORT-
Bedienung
- mit zweiter elektrischer Bedienung am
Ansaug
inklusive Montage im Werk (1 Funktion)
Elektrische Steuerung für
Endabschaltung Schwimmer
- mit 1x elektrisch über
KOMFORT-Steuerung,
inklusive Montage im Werk (1 Funktion)
Hydraulische Steuerung für Auslaß-
schieber Pumptankfahrzeug
- mit 1 x doppelwirkend über KOMFORT-
Steuerung
inkl. Montage im Werk (1 Funktion)
Hydraulische Steuerung für
Schleppschuhverteiler
- mit 3 x doppelwirkend über
KOMFORT-Steuerung,
inklusive Montage im Werk(3Funktionen)
Hydraulische Steuerung für
Entriegelung der Seitenarme mit
- 1x einfachwirkend über KOMFORT-
Steuerung
inklusive Montage im Werk (1 Funktion)
Hydraulische Steuerung für
Teilbreitenschaltung links und rechts
- für Schleppschlauch mit 2x
doppelwirkend über KOMFORT-Steuerung,
inklusive Montage im Werk (1 Funktion)
Elektrische Steuerung für einen
Arbeitsscheinwerfer
- mit 1x elektrisch über
KOMFORT-Steuerung,
inklusive Montage im Werk (1 Funktion)
Lignende tilbud
Meyer-Lohne Rekordia Cargo 25.000 Ltr.
Byggeår 2023, 25300 l, BKT 560/60R-22,5,Antal: 000000000003127148
Raiffeisen Technik Westküste GmbH, DE - 25355 Bevern
Meyer-Lohne Rekordia Pumptankwagen
Byggeår 2020, 14600 l,Antal: 000000000003456908
Raiffeisen Waren GmbH, DE - 31188 Holle
Meyer-Lohne Vt 18000
Byggeår 2008,Antal: S20949
Lankhorst Nord, DE - 26607 Aurich
Meyer-Lohne Pt 12000
Byggeår 1986,Antal: 11622
Lankhorst Nord, DE - 26607 Aurich