New Holland BB 1290 RC PLUS

Dealer number ATC2979321
Pris inkl. Moms 19 % 101.031 €
Pris ekskl. Moms 84.900 €
Make New Holland
Model BB 1290 RC PLUS
Byggeår 2019
Timer 25000
Yderligere information
Type: Brugt maskine
Make: New Holland
Model: BB 1290 RC PLUS
Byggeår: 2019
Timer: 25000

Oplysninger

Bale dimensions:
Width 120 cm / height 90 cm
Length 100 cm min. / 260 cm max.

Tractor requirements:
Minimum power at the PTO shaft 160 HP
PTO speed 1000 rpm
Auxiliary control units 3

Main drive:
Enclosed, triple reduction gearbox
reduction gearbox, running in oil bath
Overload protection - shear bolt, freewheel clutch
clutch and slipping clutch

MaxiSweep pick-up:
Width 2.35 m
Roller hold-down device
Single auxiliary roller
Tine diameter 6 mm
Floor guide - adjustable spring
2 feeler wheels 15x6.00-6-4PR

CropCutter system:
29 knives
Knife change - extendable knife drawer
loading
Hydraulic swiveling in and out of the knives
Knife lock through single spring

Feeding system:
rotor width 1200 mm, W-shaped tine arrangement
arrangement
Overload protection shut-off clutch
Feed rake with 6 tines
Shear bolt
Pre-pressing chamber volume 0.3 m³
SmallFill System

Pressing piston:
Speed 48 strokes/min.
Stroke length 710 mm

Binding system:
Double knotter
3 electric knotter blowers
Monitoring - IntelliView monitor and
visual display
2 twine boxes capacity 32 twine
rollers

Press seal system:
proportional 3-way control
Control via IntelliView monitor

Miscellaneous:
Pre-fitting ISO
headlights
Central lubrication

Special equipment:
620/50R22.5 - 154D tires
Tandem steering axle (60 km/h)
Tandem air brake system
Moisture sensor
Bale ejector double bale ejector (for
emptying the complete bale chamber
or the last bale in combination
with the split roller chute)
PickUp with swivel feeler wheels
LED service lighting left and right
side in the twine box
collision protection / bale ramp mounted
Electronic bale length control
IntelliCruise activation of the autom.
Feed speed activation
Hydraulic support foot
toolbox
New Holland baler
Automatic translation from German without guarantee.
Show original description

Kontaktinformation
AGRAVIS Technik Center GmbH
Gewerbering West 14
39240 Calbe / Saale
Tyskland
www.atc-trader.com
Kontaktperson

If you have any questions, comments or concerns, please call us.

02504 / 888 65 20